Cleaning Hints

Your new showerscreen

Please do not clean or otherwise touch your new screen for at least 8 hours or overnight (our Warranty is void if you dislodge the silicone before it is dry).

Excess silicone or printing on glass may be removed with turpentine.

Clean your screen with a mild cleanser such as Shower Power and avoid using harsh abrasives on the frame. A microfibre cleaning cloth (Enjo, Glitz etc) is also very effective. (Chemical cleaners are not necessary with the microfibre cloths.)

Looking after your showerscreen

Please check the instructions on cleaning products before use, as they may not be appropriate for some frames and screens.

Your screen is made from safety glass but it can be damaged by hard knocks or very hot water. Always ensure that cold water is mixed with the hot and that the shower rose is not pointing directly onto the glass.

Semi-Frameless door knobs must never be turned – this can over-tighten the thread – pull or push only.

Powder coated frames – Cleaners such as Shower Power or a microfibre cloth may be used to remove scuff marks. Not to be used on metallic silver or gold frames

Metallic finished frames – Simply wipe with sponge/damp cloth/microfibre cloth to remove smudges.

Acrylic Pile (at bottom of pivot door) – this has been treated to withstand mould so only use mild cleaners or just wipe with a warm damp cloth occasionally.

There are many products available to clean the modern shower screen and surrounding tiles eg Shower Sparkle, Pine-O-Cleen Spray & Go, Enjo, Glitz etc. Please follow the product directions.